A” Range Nonwoven, Needle punched, Continuous Filament, Polyester Geotextile

​

​

​

​

​

​

​

​

The sheeting is suitable for use in limited damp proofing applications in moderate site conditions. 

keeps the damp from seeping into the walls when a portion of your house is underground or built against a hill, where you are most likely to have a high moisture content.

Isolamento Térmico para aplicação em edifícios. Produtos manufacturados em poliestireno expandido

Used to fill, seal, and insulate. It cures to a durable, semi-rigid structure, is non-shrinking and has outstanding insulating properties and is suitable for interior and exterior applications

​

​

​

Provides a permanent flexible watertight seal for general purpose sealing in and around the home.

• Air Regulator Pressure Adjuster- 125 PSI Maximum; 145 PSI Maximum Input

• Pneumatic Caulk gun dispenses 10 to 20 Fl. Oz. Sausage Packs

• Dripless air powered caulk gun , quick release end cap                                                                                                                                                      

General purpose, low VOC, styrene free, two part polyester resin chemical anchor in a single, easy dispensing cartridge. Used Anchorage on any supporting material, in solid and hollow materials, and others

Two component, solvent free, polysulphide modified epoxy adhesive. Bonding fresh (plastic) concrete to existing concrete, plaster to brickwork. Can be used to provide a damp-proof barrier within the concrete matrix

​

brixeal é um impermeabilizante de emulsão betuminosa é utilizado para impermeabilizar as faces das vigas e pilares de concreto, para evitar o desenvolvimento de uma ligação entre duas faces de concreto adjacentes, entre outros

can be used for emergency repairs to concrete
and masonry in areas such as: Emergency repairs to potable water retaining structures, Repairing voids and honeycombed areas, Patch repairs to elements like, airport aprons, concrete floors, roadways, pavements and access ramps

A non-shrink powder additive for cementitious grouts and concrete, CHRYSO®NS Grout Additive is a combination between a plasticising agent and a gas producing expansion medium.

A ready to use flexible slurry based on a special synthetic resin dispersion and a blend of selected cements mixed with carefully graded aggregate

​

​

abe.®cote 337 is a two component, solvent free, water dispersed, polyamide cured epoxy. Is a protective, decorative and oil resistant coating for: cementitious, masonry and asphaltic surfaces, floor coatings and an economical primer for Hi-build/abe.®flo.

A highly flexible liquid applied emulsion reinforced with abe® membrane to provide an in situ, seamless professional waterproofing system.

​

​

As a grouting medium, either as supplied or converted into a mortar, for fixing starter bars, bolts and other similar items, vertically down into concrete or rock. As a flowable grout or bedding for areas of awkward access. As a fast-setting crack repairing compound.

​

​

Specifically for sealing and priming concrete, masonry and timber surfaces prior to the application of torch-on waterproofing membranes and other hot and cold applied bituminous compounds and sealants to improve adhesion

Permo-torch MS is self-protected on the upper face with mineral slates which reduces heat absorption improving the durability of the membrane and allows for it to be left as the final exposed surface.

​

​

Betume modificado APP NEW. Mistura betuminosa eficiente com níveis de desempenho entre -5ºC e + 110ºC.

Used as an expansion / contraction joint former. Jointex has good qualities with good recovery capacity. Supplied with a hinged temporary blocking piece, leaving a clean and neat sized groove

​

​

​

​

Durafoil Insububble is a four layer laminate which utilizes:1) the foil layer for reflective isulation 2) a laminating layer 3) the spunbond layer for stability, strength and thermal isulation and 4) the polyethylene bubble layer for additional insulation.

Fibertex geotextiles are used in building and construction works for separation, filtration, drainage, protection, stabilisation and reinforcement. Fibertex geotextiles are manufactured from virgin polypropylene fibres with added UV stabiliser

​

​

​

​

​

SMOOTH LINER SPECIFICATION

Placas em espuma rígida de poliestireno extrudido (XPS) para isolamento térmico de edifícios.

​

COBERTURAS E PAVIMENTOS

Excellent adhesion, strength, flexibility and resists cracking and will form an effective durable seal against water, dust and fumes. It is easy to apply and is compatible with most material used in construction

Used for caulking, grouting, jointing and embedding in building construction. Compatible with most materials used in construction e.g. concrete, wood, brick, natural and artificial stone, glass, metal and sanitary-ware.

​

​

​

Used for caulking, grouting, jointing and embedding in building construction. Easy to apply and compatible with most materials e.g. concrete, wood, brick, natural and artificial stone, glass, metal and sanitary-ware.

Specially formulated for interior/exterior wall and floor applications

​

​

​

​

flexothane 27 is an elastic, one part, low modulus, gun grade moisture curing polyurethane sealant.

​

​

​

​

One-component, polymer modified cementitious blend, which only requires the addition of a minimal amount of clean water. Unique formulation provides a fair-faced finish to concrete and masonry

A ready for use (merely add water) Portland cement-based grouting compound. It contains graded siliceous aggregate and chemical reagents which prevent shrinkage during curing.

dura.®proof cem block is a powdered waterproofing admixture that when added to Portland cement plaster or mortar mixes obstructs the capillaries and restricts moisture movement.

​

flexible, bitumen-modified, self-adhesive tape embedded with a stitch bond non-woven fabric which is paintable.

ecofelt is a 100% polypropylene continuous filament saturation membrane. It has been proven internationally to be one of the best saturation membranes for improved waterproofing performance.

SOBRE O SISTEMA ECOFELT DURAFLEX 

A bituminous solution with petroleum solvents. It’s solution suitable for sealing and priming of all porous and nonporous surfaces prior to treatment

​

​

​

carbolineum is a dark brown to black liquid derived entirely from coal tar and having a typical coal tar odour. It is a blend of creosote and coal tar.

is a polymer modified cementitious based crack filler that provides superior adhesion, compression and tensile bond strengths including excellent waterproofing properties. 

​

​

​

​

--

Betume modificado APP NEW. Mistura betuminosa eficiente com níveis de desempenho entre -5oC e + 110oC. Feltro de poliéster reforçado. Face superior – Filme de polietileno. Face inferior – Filme de polietileno.

​

are waterproof plastomeric membranes capable of offering excellent performance. They are made from a polypropylene-modified distilled bitumen compound and a polyester staple-fibre nonwoven carrier reinforced and stabilized with glass strands parallel to the machine direction.

Is a permanent preformed joint filler. They are highly fl exible and compressible, with excellent recovery properties and tensile strength.

Airothene is a closed cell protective foam which offers superior surface protection without scuffing, scratching or sticking to delicate surfaces. It is an ideal protective wrap or interleaving layer for extra protection.

Recycled Black Product for General Purpose Use 

​

​

​

​

​

​

​

​

​

micron dampproof course is best utilised in preventing rising damp in walls. It prevents efflorescence and flaking of the wall covering. It will not absorb water and is chemically inert.

Placas em espuma rígida de poliestireno extrudido (XPS) para isolamento térmico de edifícios.

​

PAREDES

Contractor’s grade one-part acetoxy-curing silicone sealant that provides a permanent flexible watertight seal for general purpose sealing in and around the house.

A versatile, high quality, low modulus neutral curing silicone sealant with excellent adhesion to a wide variety of substrates. It provides a durable, flexible, watertight seal ideal for internal and external sealing applications, waterproofing and weatherproofing in and around the construction site and home.

​

• Pressed steel, powder coated

• Skeleton
• Aluminium tube body

​
 

Designed to point tile joints on walls and floors up to a maximum width of 10mm for both interior and exterior applications. Contains additives which improve water resistance, and workability.

​

​

For all areas where a seal or bond is needed, no limit secure and seal.

​

​

​

a one component, cementitious blend which sets rapidly after addition of a minimal amount of clean water. They are fast setting mortars, which are easy to apply for the purpose of curtailing water seepages and similar difficult to apply situations

Is a single pack, rapid hardening cement based screed for levelling floors where quick setting is essential. Can be hand applied by trowel (0 – 20 mm) or can be pumped (4 – 20 mm). 

abe.®prime SLC acrylic primer is an acrylic emulsion based primer For priming concrete screed sub-floors and impermeable surfaces
(tiles and terrazzo)

Liquid applied, high performance, highly elastomeric, solar reflective fi nishing coat modified with synthetic polymers. Is both bitumen and solvent free and is environmentally and applicator friendly.

​

​

A bituminous solution with petroleum solvents use to general purpose reflective aluminium paint for metallic,
most bituminous and concrete surfaces.

​

​

​

A rubberised bitumen emulsion, which is used together with abe® membrane to provide a liquid waterproofing system. abe® super laykold is koi fish friendly.

​

​

​

Thixotropic water dispersed bitumen emulsion. Its a general purpose bituminous coating and vapor barrier and flooring system binder

​

dura.®latex is a synthetic resin polymer which is supplied as a ready to use liquid. It is designed to improve the qualities of site-batched cementitious mortars and slurries. Being resistant to hydrolysis, it is ideal for internal and external applications in conjunction with cement.

​

--

Betume modificado APP NEW. Mistura betuminosa eficiente com níveis de desempenho entre -5ºC e + 110ºC. Feltro de poliéster reforçado. Rolos de 10,0 m2 (1,0 m x 10,0 m), com peso nominal de 40,0 kg e retilinearidade ≤ 20 mm/10 m

are waterproof plastomeric membranes capable of offering excellent performance. They are made from a polypropylene-modified distilled bitumen compound and a polyester staple-fibre nonwoven carrier reinforced and stabilized with glass strands parallel to the machine direction.

Our range holds plastic Chair Spacers for all horizontal reinforcement, Universal Spacers for all on site or pre-cast concrete applications, and Circular Spacers for vertical reinforcements, such as walls and columns.